Antec announced a P10C building with a minimalist design designed to create game desktop computers based on a motherboard type of ATX, Microsoft-ATX and Mini-ITX. The new one is designed to provide a minimum noise level.
The side and top panels, as well as the front section, contain sound absorption material. A removable air filter is installed in front. Four quiet 120-mm fans are included in the assembly: three are located in the front and one is located in the rear. No illumination is provided.
Inside there is space for seven expansion maps; the length of graphic accelerators can be as long as 405 mm. The data storage subsystem follows the following pattern: 1 x 3.5 inch, 2 x 3.5/2.5 inch and 3 x 2.5 inch; behind the opening front panel is a 5.25 inch compartment.
In the case of air cooling, up to six fans of 120 mm may be used. In the case of a liquid circuit, two radiators may be installed up to 360 mm at the front and 120 mm at the rear. The limit on the height of the processor cooler is 175 mm.
The shell has a dimension of 477 x 220 x 486 mm. The upper interface block contains two USB 3.0 ports, USB 3.1 Gen 2 Type-C, headphone nests and microphones, all equipped with dust protection plugs.